2,000 watts
for large areas.
2,000 W · Continuous wave · water-cooled · from €13,500
Power without pulse pauses.
Continuous wave
The laser cleaning unit delivers its 2,000 watts continuously, with no pause between individual pulses.
Integrated hose reel
The line to the cleaning head is kept coiled on the machine.
Water-cooled
Operation on site requires cooling water and a power connection.
Area
per hour.
The technical data sheets state an area rate for each cleaning class. The figures depend heavily on material and contamination — as an order of magnitude, they show what the BL CW 2000 is built for.
Figures according to the technical data sheet · highly material-dependent
The figures behind the area.
2000 W
Rated power
5 – 15
area rate m²/h
20.000
scanning speed mm/s
1080 nm
Wavelength
30 – 35 %
Efficiency
Show all technical data
| Laser technology | Continuous wave (CW) laser |
| Rated power | 2.000 W |
| Wavelength | 1080 nm |
| Pulse energy / pulse duration | not applicable (continuous wave) |
| Efficiency (wall-plug) | approx. 30 – 35 % |
| Area coverage rate | approx. 5 – 15 m²/h, with heavy contamination |
| scanning speed | up to 20,000 mm/s |
| Cleaning patterns | 8 modes |
| Cooling | Water |
| Design | Mobile system with integrated hose reel |
| Laser class | Class 4 |
| Price | from €13,500 plus VAT |
The figures come from the Beamlux technical data sheet. The area rate applies to suitable, solid metals and varies considerably with material, layer thickness and contamination.
BL CW 2000 · materials
What it is built for — and what it is not.
Suitable
- Structural steel
- Heavy cast iron
- Thick stainless steel structures
- Solid, temperature-insensitive metals
Not suitable
- Thin sheet metal
- Heat-sensitive alloys
- Wood
- Historic stone façades
The continuous beam introduces a lot of heat into the material; thin parts are at risk of distortion. For sensitive surfaces and controlled layer removal, the pulsed models BL Compact Pulse and BL Portable Pulse are intended.
Is your material suitable?
Have your material testedWhere 2,000 watts go to work.
01
Steel construction and shipbuilding
Large-area industrial rust removal is the core task of the BL CW 2000 — in steel construction, in shipbuilding and wherever large areas of metal are prepared for the next steps.
02
Thick layers of paint and lacquer
Thick, stubborn layers of paint and lacquer are removed quickly. Because the beam continuously introduces heat in the process, the layer needs to sit on a solid component.
03
Machines and systems
Heavily soiled machines and systems are given a rough cleaning. What counts here is speed and area, not fine removal on sensitive edges.
Continuous wave or pulsed laser?
This page
BL CW 2000
- Continuous wave with 2,000 W
- Approx. 5 – 15 m²/h area rate
- 1080 nm, water-cooled
- Solid, robust metals
- Integrated hose reel
from €13,500 plus VAT
Alternative
BL Compact Pulse
- Pulsed, 200 / 300 W, up to 1,000 W
- Approx. 2 – 8 m²/h area rate
- 1064 nm, air or water
- Tools, moulds, preparation
- Compact system on castors
from €16,900 plus VAT
Large, solid steel surfaces → BL CW 2000
Controlled removal, finer parts → BL Compact Pulse
Laser class 4
01
Test the surface
Send in a sample sheet or arrange a test at your premises.
02
Plan operation
Clarify cooling water, power connection and extraction.
A test on your steel shows how much area is cleared.
from €13,500 plus VAT
All models and power classes: product overview